1. Counterflow Timplast Cooling Tower has wooden structure to give you strength and double edged folded, high surface area PVC Honeycomb Fills to give you maximum Surface Area for better cooling.

2. Counter Flow Cooling Towers consume approximately 15 % less power as compared to Crossflow Cooling Towers.

3. If you want to upgrade your Cooling Tower to get 10 to 15 % extra cooling then you can upgrade the tower by adding an extra layer of fills in the same cooling tower. A specialty feature of Melfrank Engineers.

4. The MELFRANK towers come with Aerodynamic POWERSAVER CT Fans that consumes 25% (+/- 5) less power as compared to the conventional Aluminium Fans. In the ever-increasing power cost scenario, the recurring cost for Melfrank cooling tower becomes very low.

5. Counterflow Towers is a natural trend in the world and more and more customers (users) are changing their Crossflow Towers to Counterflow Towers.

6. The Counterflow Towers offer uniform and progressive heat transfer to air as air moves from bottom to the top, while water moves from top to bottom. This is an efficient way for heat transfer and cooling.

7. In Crossflow Cooling Tower the heat transfer is efficient at the top, while least efficient at the bottom of the tower. Thus, power consumption and capacity of tower is not fully utilized.

8. The drift losses are less in Counterflow Tower as compared to Crossflow Tower.

9. Counterflow Tower uses less space as compared to Crossflow Tower.

10.The water distribution in Counterflow Tower is better and stays better for a longer time, while in Crossflow Tower, clogging, uneven distribution etc. are quite common.